shingx
盘已经创建出来了，看上边的报错应该是节点之间iscis网络不通哇，pod连接不上pvc哇，其它机器上安装并启动iscsi-initiator-utils了么？可以先检查下iscsi
# Verify iSCSI services are configured
# If iSCSI initiator is already installed on your node, check that the initiator name is configured using the following commands.
cat /etc/iscsi/initiatorname.iscsi
# Check iSCSI service is running using the following command.
systemctl status iscsid
# If the status is showing as Inactive, then you may have to enable and start the iscsid service using the following command.
sudo systemctl enable --now iscsid
